Community Cheat Tables of Cheat Engine
https://fearlessrevolution.com/
Hello,Kekner wrote: ↑Mon Mar 11, 2024 6:59 pmThe show all maps cheat is broken in the table so I deleted it since its of no use anymore.superadvan wrote: ↑Mon Mar 11, 2024 5:30 pm
- Suspend HD2 Process where it states to do so in the video
- Attach CE to the HD2 Process
- Load the Table into Cheat Engine
Errors when enabling inf health: "This script uses nearby allocation but it is impossible to allocate nearby A0000
- Attempt to enable any of the cheats, they do no enable.
Also, the cheat table you linked is different from the one in your video as there isn't a "Show all map icons"
Your not supposed to attach CE after you suspend the application, you must attach CE to helldivers and then wait for the address 180000000 to change (it will flash red once it has changed). Then suspend as soon as you see the address 180000000 flash red. Only then will you be able to tick and use the cheats in the menu.
You also don't have to use the Cheat Table I linked, you can use any cheat table you want! Hope this helped
you want to follow the video steps precisely to make it work. Make sure to read all the subtitles.Dromaderus wrote: ↑Mon Mar 11, 2024 10:14 pmHello,Kekner wrote: ↑Mon Mar 11, 2024 6:59 pmThe show all maps cheat is broken in the table so I deleted it since its of no use anymore.superadvan wrote: ↑Mon Mar 11, 2024 5:30 pm
- Suspend HD2 Process where it states to do so in the video
- Attach CE to the HD2 Process
- Load the Table into Cheat Engine
Errors when enabling inf health: "This script uses nearby allocation but it is impossible to allocate nearby A0000
- Attempt to enable any of the cheats, they do no enable.
Also, the cheat table you linked is different from the one in your video as there isn't a "Show all map icons"
Your not supposed to attach CE after you suspend the application, you must attach CE to helldivers and then wait for the address 180000000 to change (it will flash red once it has changed). Then suspend as soon as you see the address 180000000 flash red. Only then will you be able to tick and use the cheats in the menu.
You also don't have to use the Cheat Table I linked, you can use any cheat table you want! Hope this helped
Tried this a few times with no success...
I have only one monitor, System Informer open, CT7.5 open on memory view 180000000 and the CT Process window (with helldivers searched).
I start the game and click Attach debugger to process button, I get a popup that ask me I really want to do this and I hit yes only to get a fail message after.
UPDATE - I also get a long message about the debugger taking to long to attach and then it fails.
UPDATE 2 - Added helldivers2.exe to auto attach in CT (doesn't seem to do anything), Same setup as above but instead of clicking the button I double click the process name and everything seems to work, I enable cheat, close CT and resume process and after I close System Informer I get a hack attempt detected (using the Tenser Helldivers2.CT from viewtopic.php?f=4&t=27812&start=1545)
Is there something I am missing?
Ty in advance.
Thank you very much for the info.Heruactic wrote: ↑Mon Mar 11, 2024 11:46 pmyou want to follow the video steps precisely to make it work. Make sure to read all the subtitles.Dromaderus wrote: ↑Mon Mar 11, 2024 10:14 pmHello,Kekner wrote: ↑Mon Mar 11, 2024 6:59 pm
The show all maps cheat is broken in the table so I deleted it since its of no use anymore.
Your not supposed to attach CE after you suspend the application, you must attach CE to helldivers and then wait for the address 180000000 to change (it will flash red once it has changed). Then suspend as soon as you see the address 180000000 flash red. Only then will you be able to tick and use the cheats in the menu.
You also don't have to use the Cheat Table I linked, you can use any cheat table you want! Hope this helped
Tried this a few times with no success...
I have only one monitor, System Informer open, CT7.5 open on memory view 180000000 and the CT Process window (with helldivers searched).
I start the game and click Attach debugger to process button, I get a popup that ask me I really want to do this and I hit yes only to get a fail message after.
UPDATE - I also get a long message about the debugger taking to long to attach and then it fails.
UPDATE 2 - Added helldivers2.exe to auto attach in CT (doesn't seem to do anything), Same setup as above but instead of clicking the button I double click the process name and everything seems to work, I enable cheat, close CT and resume process and after I close System Informer I get a hack attempt detected (using the Tenser Helldivers2.CT from viewtopic.php?f=4&t=27812&start=1545)
Is there something I am missing?
Ty in advance.
Set your game to launch in windowed mode if you only got 1 screen.
Step one open Cheat engine 7.5 and System Informer
open Memory browser on Cheat Engine.
Write down that long number 180000000 and copy it to clip board for easy paste (there are 7 zeroes)
pop open Find process and in both CE and SI type in Helldiver. (Note, in CE when you START helldiver game, you need to click on Applications tab and then back to processes so it refreshes and shows the game exe file)
START helldiver2
Asap attach the process to Cheat engine (if it does not populate in process tab, click on application box and back to process tab)
Right click on the Memory Browser and select (go to address) Paste in the number 180000000. You should now see that address as the first one on the list of addressed in memory viewer.
Now, System Informer. Right click on Helldivers process only. (Do not select all 4 processed that are associated with it.)
Hover your mouse cursor over the "suspend" button But do not click it yet.
AS SOON As you see that Address Value 180000000 change from "00 00 00 00" to Anything else. just left click on Suspend button immediately.
You do not need to see the Game "black screen" yet. Once the number change, Suspend that sucker.
Take the Cheat engine table you downloaded from our Wonderful Lord and master the cheat maker. And drag it into Cheat Engine window. (Lower part)
Click on All the cheats you want.
Wait a few seconds. completely close Cheat engine.
Wait 5-10 seconds. Then Right Click Helldivers in System informer and "Resume"
Afterwards just close system informer.
I have a good PC and good SSD. So i have to time it pretty fast. If i can do it, so can you. I recommend being at least on Windows 10.
I have done this 4 times last night. Once you practice it once or twice, you can make it happen.
Go forth and dont be a dick to others. Cheat if you are playing Solo or with a friend you trust.
)Dromaderus wrote: ↑Tue Mar 12, 2024 12:53 amWhole process should take 10-15 seconds top from the moment you launch helldivers. It does take a few tries.Heruactic wrote: ↑Mon Mar 11, 2024 11:46 pmThank you very much for the info.
I have an ok pc with an SSD, the game loads a bit to fast, if I blink I am already looking at the intro.
Managed to follow your instructions with the same result as the above mentioned "UPDATE 2", will try again tomorrow after some sleep.
I wrote the incorrect order in my post. It is attached then suspended as it shows in the video.Kekner wrote: ↑Mon Mar 11, 2024 6:59 pmThe show all maps cheat is broken in the table so I deleted it since its of no use anymore.superadvan wrote: ↑Mon Mar 11, 2024 5:30 pm
- Suspend HD2 Process where it states to do so in the video
- Attach CE to the HD2 Process
- Load the Table into Cheat Engine
Errors when enabling inf health: "This script uses nearby allocation but it is impossible to allocate nearby A0000
- Attempt to enable any of the cheats, they do no enable.
Also, the cheat table you linked is different from the one in your video as there isn't a "Show all map icons"
Your not supposed to attach CE after you suspend the application, you must attach CE to helldivers and then wait for the address 180000000 to change (it will flash red once it has changed). Then suspend as soon as you see the address 180000000 flash red. Only then will you be able to tick and use the cheats in the menu.
You also don't have to use the Cheat Table I linked, you can use any cheat table you want! Hope this helped
The table I attached to the post with my tutorial may no longer work as of when that post was made. It is possible that the cheat table is the issue and you are doing nothing wrong. Try a different table and see if you get better results? However just for peace of mind could you just double, triple, quadruple check that you are following the steps correctly and / or post a video of your attempt so it is easier to point out any mistakes made.superadvan wrote: ↑Tue Mar 12, 2024 2:50 pmI wrote the incorrect order in my post. It is attached then suspended as it shows in the video.Kekner wrote: ↑Mon Mar 11, 2024 6:59 pmThe show all maps cheat is broken in the table so I deleted it since its of no use anymore.superadvan wrote: ↑Mon Mar 11, 2024 5:30 pm
- Suspend HD2 Process where it states to do so in the video
- Attach CE to the HD2 Process
- Load the Table into Cheat Engine
Errors when enabling inf health: "This script uses nearby allocation but it is impossible to allocate nearby A0000
- Attempt to enable any of the cheats, they do no enable.
Also, the cheat table you linked is different from the one in your video as there isn't a "Show all map icons"
Your not supposed to attach CE after you suspend the application, you must attach CE to helldivers and then wait for the address 180000000 to change (it will flash red once it has changed). Then suspend as soon as you see the address 180000000 flash red. Only then will you be able to tick and use the cheats in the menu.
You also don't have to use the Cheat Table I linked, you can use any cheat table you want! Hope this helped
Sure, although disable isnt tested. Worked yesterday.
Code: Select all
[ENABLE]
aobscanmodule(aob_CheckIsBlipSeen,game.dll,41 0F B6 44 97 23)
aobscanmodule(aob_CheckIfAlienHivesAreObstructed,game.dll,41 80 BE 3C BA 07 00 00)
aobscanmodule(aob_CheckIfMinorInterestBlipIsDiscovered,game.dll,0F 85 ?? ?? ?? ?? 48 8B 44 24 ?? 80 78 29 00)
aobscanmodule(aob_GetMinorInterestBlipIcon,game.dll,0F 84 ?? ?? ?? ?? 48 8B 4C 24 ?? F3 41 0F 10 4F)
aobscanmodule(aob_CheckMissionBlip,game.dll,0F 85 59 02 00 00 49 8D)
registersymbol(aob_CheckIsBlipSeen)
registersymbol(aob_CheckIfMinorInterestBlipIsDiscovered)
registersymbol(aob_GetMinorInterestBlipIcon)
registersymbol(aob_CheckIfAlienHivesAreObstructed)
registersymbol(aob_CheckMissionBlip)
aob_CheckIsBlipSeen:
db B8 01 00 00 00 90
aob_CheckIfAlienHivesAreObstructed:
db F8
nop 7
aob_CheckIfMinorInterestBlipIsDiscovered:
db 90 E9
aob_GetMinorInterestBlipIcon:
db EB 04
aob_CheckMissionBlip:
db 90 E9
[DISABLE]
aob_CheckIsBlipSeen:
db 41 0F B6 44 97 23
aob_CheckIfAlienHivesAreObstructed:
db 41 80 BE 3C BA 07 00 00
aob_CheckIfMinorInterestBlipIsDiscovered:
db 0F 85
aob_GetMinorInterestBlipIcon:
db 0F 84
aob_CheckMissionBlip:
db 0F 85
unregistersymbol(aob_CheckIsBlipSeen)
unregistersymbol(aob_CheckIfAlienHivesAreObstructed)
unregistersymbol(aob_CheckIfMinorInterestBlipIsDiscovered)
unregistersymbol(aob_GetMinorInterestBlipIcon)
unregistersymbol(aob_CheckMissionBlip)It still works for meBoBFalcon07 wrote: ↑Tue Mar 12, 2024 8:06 amMan this was awesome when all we had to do was add a DLL named version and BAM it worked, fuck I want cheats to be FUN! Fuck arrowhead and SONY,. let us play games and have fun.
How?XathMan83 wrote: ↑Wed Mar 13, 2024 3:45 amIt still works for meBoBFalcon07 wrote: ↑Tue Mar 12, 2024 8:06 amMan this was awesome when all we had to do was add a DLL named version and BAM it worked, fuck I want cheats to be FUN! Fuck arrowhead and SONY,. let us play games and have fun.